Categories
Netgear Router

How Do I Set up Netgear Router Using Windows Computer ?

How To Set up Netgear Router

Hello Guys,
if you have bought a new netgear router but you don’t know how to set up a netgear router.

do not worry, today, in this article, I am going to show you about how to install netgear router. so read the article and follow the instructions to set up your router by yourself.

when we talk about netgear wireless router. They are the smart WiFi router. That’s why they automatically detect internet settings and other configuration by themselves. all you need to need to do, just make a proper connection between router and modem.

Step 1-

after unboxing your router from the box. first, you need to set up the connection between router, modem, and computer. For that you need to follow the instructions below:
Connect your modem from internet port of the router via Ethernet cable.
Get another Ethernet cable and connect that cable from Lan port of the router to the computer.
Note– if you have a laptop or wireless computer, you may also try to connect your computer to Netgear router using the wifi facility.

After setting up a connection between your Netgear router, modem, and computer, it’s time to power on your router.
So you need to plug in the power cable and wait for 1 minute to have solid green internet light on your router.
If you are not getting a solid green light on your router, then you can try to reboot your modem and modem and wait for 1 minute again. For more information you may visit: how to fix Netgear router is blinking orange problem?

Step2-

Once you have solid green internet light on your router, it’s a time to set up Netgear router.
so you need to go to your computer and follow the instructions below:

Open Any web browser (ex- internet explorer, Mozilla Firefox etc.).
In the top address bar, type 192.168.1.1 and press enter button.
Now you will able to see, we are detecting your connection window. here you need to wait for a while.
If your Netgear wnr200 router will detect the connection successfully then you will able to see, “congratulations! You are connected to the internet message”.
Here you need to click on take me to the internet button.
If you are getting, you are not connected to the internet message then you need to visit: Why is my Netgear router is not working?

Categories
Netgear Router

How Can I Troubleshoot Netgear Router Blinking Orange Problem?

“Today’s article is about how to fix netgear router blinking orange , if you have flashing orange light on your wifi router. please follow the steps given into this article.”

People, who are honored with Netgear Wireless router, feel very happy with its execution.

However, at some point it makes a truly basic issue for clients such as Netgear router is blinking orange, one of the most serious issue nowadays.

netgear router blinking orange , netgear router flashing orange , netgear router flashing amber light

So today in this article, we will talk about what is the reason for this problem and how to troubleshoot Netgear router is blinking orange.

netgear, router, fixing, problems

you need to read this article properly and follow the instructions to fix your router problem by yourself.

Why is my Netgear router blinking orange :

Well, there are few reasons for Netgear router blinking orange. which is listed below:

  • Internet service provider (ISP) Problem.
  • Connection problem.
  • DNS/ DHCP Problem.
  • Using a Router with old firmware.

How to fix Netgear router is blinking orange Issue:

So we have already discussed the causes of why my Netgear router is blinking orange. now it’s a time to troubleshoot such a problem. Let’s go with the instructions below.

Internet service provider (ISP) Problem – before you will go for any further alternatives, first you have to ensure that you are getting the internet from ISP.
So you need to connect your modem directly to the computer via Ethernet cable and try to access the internet.

netgear router blinking orange, netgear router flashing orange

Check Connection – you should make sure, which connection type, do you have?

Some ISP provides PPOE or static ip connection, so if you have such connection type. You have to set up your router manually by entering the internet information.

Connection Problem – at some point, you may have  “Netgear router is blinking orange ” due to the wrong connection between router and modem.

So you have to ensure that your modem is appropriately connected from internet port to the router. Once your router will be connected to the modem. you have to reboot your router and wait for one minute.

netgear router blinking orange, netgear router flashing orange

once your router will be connected to the modem. you have to reboot your router and wait for one minute.

When you will make the proper connection between the Netgear router and modem. you have to reboot your router and wait for one minute.

netgear, router, fix , problems

Mac cloning – At the point when your modem is not ready to recognize Netgear router. We have to do mac cloning. so your modem can serve the internet to your router. for mac cloning you need to follow the instructions below:

netgear router blinking orange, netgear router flashing orange

  • Open Netgear router setup page.
  • Go to advance option.
  • Now mac cloning.
  • Finally, you need to click on the clone and click on apply.
Using Router With Old Firmware-

if you are using an old Netgear router. it may cause Netgear router blinking orange issue as a result of old firmware.

netgear router blinking orange , netgear router flashing amber internet light

So you should try to update the router’s firmware properly. for updating the firmware you may visit: How To Update Netgear Router Firmware?

Factory Restore- if you have tried all methods listed in above paragraphs. But still, your Netgear router is blinking orange.

In such a situation, you need to restore your router. so you need press and hold the factory restore button for 30 seconds and release the button.

Once you will reset your router successfully then you need to setup Netgear router once again. For more information you may visit: How To Setup Netgear Router? 

Hardware Issue:

After following all these instructions, I am sure your Netgear router will start working fine. but somehow, if your Netgear router is still blinking orange. in such a situation, your router might be a hardware failure. so you need to replace your router.

in such a situation, your router might be a hardware failure. so you need to replace your router.

you may also read:

How to fix Netgear router not working problem

If you have any other issue with your Netgear router or any other electronic gadget, please leave a comment below.

we will share troubleshooting steps in our next post for that specific post.

if you have any query, just visit:

how to fix Netgear router blinking orange problem. 

Categories
Netgear Router

Why Is My Netgear Genie Saying You Are Not Connected To Internet?

Error: Netgear genie says, you are not connected to the internet.

This is the most common problem people are reporting for. every day, when anyone tries to set up a new or old Netgear wireless router.

they might face this issue during the installation process.

if you are also going through this problem and looking for the solution. do not worry, we are here to share some instructions on how to fix you have not connected to the internet.

Just follow them and troubleshoot your problem by yourself without inviting any technicians at your door.

Basic tips for resolving you are not connected to internet issue:

  • Whenever you have any problem with any router. I always suggest you reboot your router and modem first and wait for 1 minute. after rebooting the router, if you are getting blue light, then you can try to access the internet.

but if you are getting orange light on your router, then I will suggest you check the internet connection.

for more information, you may visit:  how to fix Netgear router is blinking orange problem? 

  • Make sure you are getting internet on your modem. for checking the internet connection. you may look at internet light on your modem. if you are getting blue or green light. then you are getting internet.

But if you are not getting a blue or green light, I will suggest you contact your internet service provider and ask them for the solution.

  • Make sure you have connected your modem from internet (WAN) port of your Netgear router via ethernet cable.

Advance troubleshooting steps to resolve not connected to internet issue:

If you have made the proper connection between router and modem and you are getting blue internet light on your modem.

but still, your Netgear router is not working. I will suggest you check the following settings:

Check Connection type – 

before you will try to set up your Netgear router. you should check the internet connection. the internet service providers are sharing various type of internet connection. I have listed them below:

  • DHCP
  • PPOE
  • STATIC
  • PPTP
  • Bridge Mode

So if you are planning to a setup Netgear router. make sure, you know about the internet connection type and you should also have knowledge about internet settings, like IP address, username, password etc.

in case, if you don’t have internet configuration settings.you can call your internet service provider to know about internet connection type and settings.

after getting the internet settings, you may configure your Netgear router manually.

Configure Netgear router manually –  

if you have PPPoE connection type. in that case, your modem will not able to identify the internet connection type. so I will suggest you configure your Netgear router manually by following the instructions given below:

  • Open Netgear router setup page.
  • Go to internet settings.
  • Choose the internet connection type and fill the info: like username and password.
  • After filling the info, you can click on apply changes.

Finally, your router will reboot and if settings will be correct. then your router would have the connection to the internet.

You may also read about: why is my Netgear router is blinking orange?

Hard Reset the router – 

if your router is not able to identify the internet connection and it is giving you same message again and again. I will suggest you reset the router.

For resetting the router, you need to press and hold the reset button for 1 minute. after releasing the button, you need to reboot your router.

once your router will be rebooted, you may go ahead and try to set up your Netgear router again.

Thank you for reading the post,

Categories
Netgear Router

How To Update Netgear Router Firmware?

Hello Netgear User,

This article is about how to update Netgear router firmware, so if you don’t know about how to update the router firmware, read this article until the end and follow the instructions to fix the problem.

Update the Netgear router firmware using setup page:

These instructions are for the old Netgear routers. Which doesn’t support Netgear genie software? basically, in this process, you need to download the latest firmware from Netgear official websites and then follow the instructions given below:

  • Connect your computer to the Netgear router using Ethernet cable.
  • Now Open the Netgear router setup page, using default IP address: 192.168.1.1 or router’s ip address. Type the username and password for your router login, the default username and password for Netgear router are:

Username: admin

Password: password

If you have changed the router password, then you need to type your router password.

  •  Scroll down and choose router upgrade option.
  • Click on choose files,
  • Now you need to select the firmware file and upload it.
  • Once you will upload the router setup file, you need to click on the router upgrade option.
  • Finally, your router will start upgrading itself, this may take some time.

Read Also: How To Setup Netgear Router

Update the Netgear router firmware Using Netgear genie:

  • Open Netgear Gennie App
  • Once you will log in to the router setup panel, you need to click on the advance option.
  • Now you need to click on administration settings,
  • Here you need to click on router firmware.
  • If you can see any update available for the router update, you need to click on update. Once you will click on update, your router will automatically detect the latest version of firmware and install it.

This process may take a while, so do not turn off your router or computer, once the firmware will be updated, your router will reboot once automatically.

So these are the instructions for update Netgear router firmware. If you have any other problem, you may leave the comment below. We will reply it with the solution.

Categories
Netgear Router

Netgear Router Not Working Suddenly Stopped Working | Troubleshooting

Before writing any troubleshooting article on my website, I love to do a little survey on the community websites. So I can write a troubleshooting article on something that can help more than a thousand users.

netgear router stopped working

Today, when I was doing research on google and there I found, Netgear router not working is one of most asked question on almost every web community or forum. Apart from this question, there were some other similar questions as well, which is listed below:

  1. My Netgear router not connecting to the internet.
  2. No internet on the Netgear router.
  3. Netgear router is blinking orange.

So these are few questions, for which people are complaining every day. But sadly, most of them were still not able to fix their Netgear router. after reading all the comments and other things, today, I decided to write an article on how to troubleshoot Netgear router not working problem.

Causes of Netgear Stopped Working-

Actually, your Netgear router may be stopped working because of several reasons such as connection problem, invalid internet settings, the firmware is outdated or power outage.

But most of the time, people are going through Netgear, not working problem, when their Netgear router cannot detect the modem.

So before performing any techniques to troubleshoot Netgear router stopped working problem, first I will suggest you restart your modem and router. After rebooting the router and modem, you need to wait for one minute.

If you will start getting solid blue or green internet light on your Netgear router,  congrats! Your problem has been resolved. But if you still get orange light on your Netgear router, then you need to follow the instructions given below.

Note– Whenever you have no internet on Netgear router. you should check the internet connection status as well. make sure you are getting internet on your modem.

To ensure the internet connection, you should connect your modem directly to your computer via Ethernet cable. After that, you should try to access the internet.

If you can’t access the internet from your modem as well, then you need to call your internet service and ask them to check the connection.

Techniques To Troubleshoot Netgear Router Not Working Problem –

netgear, router, fix , problems

Check the cable connection –

Your Netgear router may stop working, just because of physical connection between router and modem.

You need to make sure your modem is connected from internet port of the Netgear via Ethernet cable.

netgear router stopped working , netgear router not working

Sometimes, the cable may also have defected, so try to replace an Ethernet cable and connect a new Ethernet cable from modem to the router.

Update Mac Cloning – 

Mac cloning is responsible for authenticating the services. Most of the ISP are provides internet after recognizing the mac address.

If your modem is not able to identify the router, it may cause Netgear router not working problem. so you should try to clone the mac address once as well.

To clone the mac address you need to follow the instructions given below.

  • Connect your computer to anyone LAN port of the router via ethernet cable.
  • Open your browser and go to routerlogin.net and press the enter button.
  • Now login to the Netgear router setup page and go to advanced option.
  • Click on setup and internet status.
  • Scroll down and click on use computer mac address.

After cloning the Netgear router, you need to restart the router and modem.

 Update the Router Firmware-

If your Netgear router has outdated firmware, it may cause Netgear router not working problem. so you should try to login the page and try to update the Netgear router firmware.

Factory restore the router-

After following the above steps, if your Netgear router is still not working, I will suggest you to factory restore the router.

To Reset the router, you need to take a pin or pen and press and hold the reset button on your router for one minute.

Once you will factory reset the router. you need to restart the Netgear router once again,  and then you need to setup Netgear router again.

After following these instructions, your Netgear router will start working fine. If you still have any other problem with your Netgear router, you may leave the comment below.

Netgear router won’t connect to the internet

We will reply that comment with the solution,